Solar Charge Controller Specification


Type solar charge controller with LED driver inside
System voltage □12V;□24V
Output power 12V≤30W 24V≤60W
Output voltage (Vin+5V)~60V
The output ripple wave (typical) ≤600mV
Output current ≤1.3A
Output constant current accuracy <2%
Typical efficiency 90%
Work temperature -30℃— +65℃
No load consumption ≤10mA
Charge circuit voltage drop ≤0.26V
Load circuit voltage drop ≤0.15V
Over voltage protection 17V,×2/24V;
Boost charge voltage 14.6V;×2/24V;(Keep 10min)
Direct charge voltage 14.4V; ×2/24V Keep 60secds)
Float charge voltage 13.6V; ×2/24V;
Charge return voltage 13.2v; ×2/24V;
Temperature compensation -5mv/℃/2V(Boost charge,direct charge,Float charge return voltage)
Lower voltage indicate 12.0V; ×2/24V;
Over discharge voltage 11.1v(no load) modified voltage by discharge rate of battery×2/24V
Over discharge return voltage 12.6V;×2/24V;
Control mode MTTP charge mode;modified discharge voltage by the discharge rate

Leave a Reply

Your email address will not be published. Required fields are marked *